Tips N Tricks for Ur PC

How to auto restart Windows Xp and Vista in case of System Failure


   How to auto restart Windows Xp and Vista in case of System Failure Windows Blue Screen of Death in both of Xp and Vista are the most terrible thing which happens when there is a system failure and machine comes to an halt. The next you do is power down the machine and start it manually. However you can change this to make it restart automatically after the dump is created instead of waiting.
-* Right click on My Computer and Click Properties
-* Click on settings of System and Recovery.
-* Remember this place is you can configure what the system will do when it gets into system failure.
-* Just check the check box which says Automatically restart Now the next time your computer goes for a system failure it will auto restart.
-But You will have to wait for the dumb to get created.
-Moreover you can also check for Overwriting the old dump file in case you want to save some space
►Trick To Make Computer Speak Whatever You Type


  This is an amazing trick to amaze your friends.
-By using this trick you can make your computer to speak whatever you type.
-This trick is working on all microsoft operating system and does not require any programming skills.
-You have to follow just simple steps and your own Text to Voice software will be ready.
-If you show this software to any of your friends he will be certainly impressed with you .
-Ok,the trick is fairly simple and requires only 3 simple steps from your side.
-Let’s Begin 1.Open Notepad and copy and paste the following code into it Dim message, sapi message=InputBox("What do you want me to say?","Speak to Me") Set sapi=CreateObject("sapi.spvoice") sapi.Speak message
-2.Now save the notepad file with the name speak.vbs at your desktop.
-3.Now double click on speak.vbs type in the box whatever you want your computer to speak for you.

How to Share a Folder in Windows Systems

   -How to Share a Folder in Windows Systems If you have a home network or inside a corporate network, you can share your files with other computers in your house or share office documents with your co-workers.
-Having a shared folder is convenient for file exchange.
-You don’t need to bring a blank CD or a flash drive to another computer to copy the files you need and bring back to your computer.
-In order for you to set up a shared folder, you need to have a home workgoup network setup or under the same domain inside a corporate.
-You can follow these steps to setup a sharing folder.
-Step 1 Create a new folder, you can place inside the C drive, or you can put in on your desktop or inside your “My Documents” folder.
-Step 2 Now select the folder and right click on it, choose “Properties”.
-The folder properties window opens up.
-Step 3 On the top of the window, click on “Sharing” tab.
-And select the radio button “Share this folder”. Then enter a name for the share name.
-Step 4 On the same window, click on “Permission” and the permission window will come up.
-The default group or user names is Everyone, of course you can add or remove another group or user by clicking the “Add” and “Remove” buttons. Step 5 In the permissions box, give proper permissions to each group or user: “Read” means to grant the user to read only, while “Change” grant to edit and “Full Control” means you grant access to read, edit and delete files within the shared folder.
-Step 6 Now to test your work: from Start, click on Run, enter the network path to the folder, normally looks like this: pcnamesharedfoldername

Speed Up SATA Hard Drives&USB Drives In Windows Vista

   Speed Up SATA Hard Drives&USB Drives In Windows Vista Window Vista has built in support for SATA and external drives, but they seem to be slow because the advanced write cache features aren’t automatically activated. 
-With just few steps you can enable them and get a much faster response.
-First you need to go to the Device Manager which you can go directly by just typing device in the start menu search box or just type in devmgmt.msc in command line.
-Now open the Disk drives section and right click on your hard drive.
-Now click on the Policies tab and you’ll find this dialog box: Now click the checkbox for Enable advanced performance, and you are done.
-Write caching isn’t enabled by default as removing devices directly without using the “Safely remove removable device”may lose your data, so be cautious when enabling this options. But enabling this option also when speeding up performance significantly when writing to the disk.
-Now select the external drive and double click it to open up the properties screen.
-Then just change the setting to “Optimize for performance” and hit OK to continue.
-You’ll have to reboot for all the settings to take effect.
-Next time you boot into Windows Vista you’ll see faster bootup times and better disk writing performance.

How to Get Windows Vista To Startup Faster

  How to Get Windows Vista To Startup Faster Getting Windows Vista to startup faster is a simple process of just optimizing your computer to startup the programs or applications you want. 
-This is how you can do it very simply.
-Step 1 Go to the “Start” button on your desktop and left click on it.
-Step 2 Go the search box and in there write “defender” and press enter.
-Step 3 The Windows Defender window will pop up and in there just select where it says “Tools”.
-Step 4 Move down where it says “Software Explorer” and select that.
-Step 5 While in the “Software Explorer” window move over to the “Category” box and select the “Startup Programs” option.
-Step 6 A list of the programs that startup with Windows Vista will appear on the left hand side.
-Just select the ones you feel do not need to startup with Windows Vista.
-These programs are programs that you might have installed yourself or things like Quicktime, iTunes, Word, and RealPlayer, and so on.
-Step 7 Do not remove programs that are necessary for the startup to Windows Vista.
-Now the next time your computer restarts you will only load up the programs you wanted to making your startup time much faster.
-Congratulations and happy computing.

How to Burn a disk image on a Mac

      -How to Burn a disk image on a Mac creating a copy of your disk is a great way to make sure you don’t lose that precious DVD, video game, or music CD. Burning the disk image (otherwise known as a .iso file) is great for backing everything up. 
-However, it can sometimes be a bit confusing as to what to do with this ISO file when you have it… so here’s how to get the ISO onto a blank disk using only a Mac and no other software.
-Step 1 When you have the ISO copy of the disk on your computer, insert a blank disk into your disk drive (Make sure that the disk is large enough for the ISO, as some disks can be as large as 3 or 4 gigabytes.)
-Step 2 Open the Disk Utility. Simply searching for “Disk Utility” in the Finder will usually bring it up without a problem.
-Step 3 In the ‘File’ menu, choose ‘Open Disk Image’ and locate your .iso file. Open it and it will appear on the left-side menu. Select it and click the ‘Burn’ button in the top menu.
-Step 4 Follow the simple instructions presented to you after you select the burn function and wait.
-And that’s it! You’ve just made an exact copy of your disk!

Change the icons of Drives

   -Change the icons of Drives Change the icons of Drives All the Xp users would have been bored by the boring icons in their My Computer panel which are adjacent to the Hard disk drives(C:,D: or whatever drive letter you have). 
-Here is a simple tweak by which you will be able to change this monotonous icon to anything you like,even your own Picture if you wish You can put any image in place of one which I have shown,even the picture of your favourite celebrity or your dream caror your own Picture.
-Here are the steps you need to follow:
1.First of all the picture you want to use should have .ico extension(if you already have a pic with .ico extension proceed to step 2).Most of the pictures we normally use have extensions like .jpg,.bmp,.png..gif etc, so you first need to convert them to one with .ico extension.This is simple.Just go here and put your original image in the ‘Source Image ’section,then click on ‘Generate Favicon.ico ‘ button to get your image with .ico extension.
2.Now go to My Computer.
Suppose you want to put this icon in place of your original C: image. Double click and enter C: .Paste your .ico image file in it.Also create a new text file and in it type the following lines: [autorun] ICON=favicon.ico Remember that ‘favicon.ico’ in the second line is the name of your image file.If you have an image file with .ico extension by the name of ‘abc.ico’,then use that in the second line in place of ‘favicon.ico’.
3.Now rename this text file as ‘ autorun.inf ‘ (without the quotes). Important Note:How do I rename my text file as autorun.inf ?Ans.
Go to Tools-Folder options.Under the View tab uncheck the ‘Hide extensions for known file types’.Press apply.
-Now rename your text file as ‘autorun.inf’.
4.Now restart your Pc.You are done.Check out the cool new picture you have just added in your My computer panel.

How to Remove a Trojan Win32 Agent Malware

    -How to Remove a Trojan Win32 Agent Malware Trojan Win32 Agent is a Type of Malware which is capable of installing software/programs on your computer without your permission. 
-The program installed will launch whenever your computer is restarted/rebooted.
-These types of Trojans may even steal your Data files according to the wish of the hacker.
-While you can get rid of a Trojan Win32 Agent manually, the removal process can be difficult for some, and in some cases may still not be enough to properly remove the infection.
-For most computer users, antivirus software will be the best method for both removing the trojan and protecting the computer from future infections.
-How to Remove it? * Download and install an antivirus program such as kaspersky Antivirus, Norton Antivirus, Avast Antivirus or any highly rated antivirus software.
-If the trojan has rendered you unable to connect to the Internet, download the software in Windows “Safe Mode with Networking.
-” If necessary, use another computer to download the software to a CD or USB drive, and then install the program from the device.
-* Run the antivirus program.
-Update the software’s definitions; usually antivirus software, after installation, is not completely up-to-date.
-This means it might not be able to detect the Trojan Win32 Agent until it is updated. An update utility program is included with most antivirus software.
-Launch this utility upon running the software.
-* After the definitions have updated, use the software to designate which files and folders you want scanned. It’s usually a good idea to scan the entire hard disk.
-* Press the scan button and allow the software to search for the Trojan Win32 Agent.
-This may take anywhere from several minutes to a few hours.
-* Follow the antivirus software’s instructions on how to remove the trojan.
-Some antivirus software will automatically remove the infection; other such software will allow you to either quarantine or delete the infection.
-* Schedule your antivirus software to scan your drive at least once a week. Configure the software so that it will scan every file you download to make sure none are infected.
-Most virus removal software will do this automatically.

How to fix corrupted files in XP

    How to fix corrupted files in XP How to fix corrupted files in XP
// Introduction //
This tutorial has been made so people that are having problems with corrupted files, can learn how to fix them easy.
// Required //
+ Windows XP operating system + Windows XP cd
// Right to the tutorial //
+ Place the xp cd in your cd/dvd drive + Go to start + run + type in ’sfc /scannow’ (without the ‘) Now it should all load, and fix all your corrupted file on windows XP

How to Add Horizontal Lines in Word 2007 Document Quickly

   How to Add Horizontal Lines in Word 2007 Document Quickly ? 
You can add horizontal lines in Word 2007 document quickly without having to use the ribbon on the top of the page.
A very easy way to add horizontal lines in Word 2007 quickly is by using the keyboard shortcuts.
This method will save your time.
You will be able to insert lines of many different designs by using the keyboard and not having to use the mouse at all.
In order to add horizontal lines in Word 2007 document quickly, you can use one of the following procedures:
1. If you want to add a simple straight line, type three dashes (—) and press Enter on the keyboard.
2. For this style of a horizontal line, type three asterisks (***) and press Enter.
3. Type three underscores ( ___ ) and press Enter to get this line:
4. Type three equal signs (===) and hit Enter to get this line.
5. Three pound signs ( ### ) and press Enter for this style of line:
6. Typing in three tildes ( ~~~ ) and hitting Enter will allow you to add this horizontal line: You can add horizontal lines in Word 2007 document quickly by using these shortcuts to break two paragraphs, to mark the end of a document or to break the numerous sections of a document. By simply using a new character such as an asterisk or a pound sign, you can add style to the Word document.

For a Safer, faster XP Close Unwanted Services

   For a Safer, faster XP Close Unwanted Services To disable unneeded startup services for a safer, faster XP, use the “Services” Admin Tool (Control Panel-Administrative Tools-Services).
-If you are a single user of a non-networked machine, you can disable the following items, with no ill effect.
-Alerter Clipbook Computer Browser Fast User Switching Human Interface Access Devices Indexing Service (Slows the hard drive down) Messenger Net Logon (unnecessary unless networked on a Domain) Netmeeting Remote Desktop Sharing (disabled for extra security) Remote Desktop Help Session Manager (disabled for extra security) Remote Procedure Call Locator Remote Registry (disabled for extra security) Routing&Remote Access (disabled for extra security) Server SSDP Discovery Service (this is for the utterly pointless “Universal P’n'P”,&leaves TCP Port 5000 wide open) TCP/IP NetBIOS Helper Telnet (disabled for extra security) Universal Plug and Play Device Host Upload Manager Windows Time Wireless Zero Configuration (for wireless networks) Workstation

Some usefull comments

S0ME hidden RUN comnd for ur pc Just go start,then click on Run then type any comand below 
0)cmd - comand prompt 
1)compmgmt.msc - for computer managent 
2)devmgmt.msc - device manager 
3) regedit - registry editor 
4) msconfig - system configuratn utility . . . 
5) compmgmt.msc - Computer management 
6) devmgmt.msc - Device manager 
7) diskmgmt.msc - Disk management 
8) dfrg.msc - Disk defrag 
9) eventvwr.msc - Event viewer 
10) fsmgmt.msc - Shared folders 
11) gpedit.msc - Group policies 
12) lusrmgr.msc - Local users and groups 
13) perfmon.msc - Performance monitor 
14) rsop.msc - Resultant set of policies 
15) secpol.msc - Local security settings 
16) services.msc - Various Services 
17) msinfo32 - System Information 
18) sysedit - System Edit 
19) win.ini - windows loading information(also system.ini) 
20) winver _ Shows current version of windows 
21) calc - calculator

Windows XP SP3 to Include Some Vista Features

Windows XP SP3 to Include Some Vista Features A Web site that leaked details of Windows XP Service Pack 3 over the weekend claimed that the update includes several new features, including some borrowed from Windows Vista. According to NeoSmart Technologies, Windows XP SP3 build 3205, which was released to beta testers, includes four new features among the 1000-plus individual hot fixes and patches that have been issued since XP2’s debut three years ago. Features backported from Vista, said NeoSmart, include Network Access Protection (NAP), an enterprise policy enforcement technology that inspects client PCs before they access a corporate network, then updates the machines if necessary or blocks them if they don’t meet specified security criteria. Other additions range from a kernel module containing several encryption algorithms that can be accessed by third-party developers, to a new Windows activation model that doesn’t require users to enter a product key. Microsoft had previously announced SP3 support for NAP, which is part of Windows Vista and will be included in the not-yet-finalized Windows Server 2008. Windows XP SP3, which Microsoft has said will be released early in 2008, will be one more move by the developer to extend the lifespan of the six-year-old operating system. Last month, for example, Microsoft gave Windows XP a five-month reprieve by pushing back the end of retail sales and sales of XP-powered PCs by large resellers to June 30, 2008. And last week, Microsoft debuted a new “get-legal” program that lets companies purchase large quantities of Windows XP Professional licenses through their usual resellers. Microsoft was not immediately available for comment on the leak, or the new features touted by NeoSmart.

Protect Computers From Hardware Loss And Damages

Protect Computers From Hardware Loss And Damages There are several ways that we can protect our computers from being lost or stolen.
-The best way to protect our computers is to use preventive measures.
-In order to know which preventive measure you are going to use is depending on where the computer is located.
-You will protect your home computer differently than the way you protect you computers at scholl or at work. Here are a few suggestions on how you can protect your computer.
-Step 1 Lock Room Where Computers Are Stored If at work or at home , you should have your computer set-up in a room that can be locked when your away.
-When at work you may want to limit the access others may have to this room. At home you want to locked the room your computer is in when your gone from home for a long period of time.
-Step 2 Cable Locks For Computers There are cable locks that we are familiar with in which they are used on most public computers. 
-These cable locks are small but strong cables that allow you to lock the base of the computer to a stable foundation.
-The cables cannot be cut or torn off of the computer.
-As long as the foundation you have the computer connected to cannot be moved, your computer is protected.
-Step 3 Computer Tracking Software This software doesn’t prevent others from taking your computer, but it does provide your computer with a special way to be identified when it’s connected to a network. 
-When it’s connected the software company will identify it and this information is then given to the police and they have what they need to recover your computer.